This Blog looks at various approaches of transforming old furniture back into gorgeous, useful pieces for your home, in particularly painting.
Painting an unit might seem like a simple sufficient job but the option of both brush and paint type will truly effect the end result. It’s also essential to prep the wood initially and use a guide if you’re searching for a constant colour. Here are the fundamental actions:
Choosing the paint
For timber furnishings it’s best to use a satin or semigloss surface in either a latex or oil-based paint. This will offer you a more consistent surface and as soon as dry will offer you a much better surface.
Similar to all DIY jobs, it may get messy so it’s finest to set a dust sheet first. Ensure that you are working in a well-ventilated room and use a face mask and gloves for protection. You must likewise get rid of any of the detail off the furnishings such as handles or knobs so that you can paint these separately and not have any sign up with lines.
If there are any chips, holes or pits on the surface now is the time to fill them. Apply wood filler with a little putty knife to the harmed areas and let dry. Sand down so that there’s no overlap and it feels totally smooth versus the surface.
Using either sanding sheets or an electrical sander (if you don’t have an electric sanding tool you can use a Sanding Kit with your electric drill), sand any existing varnish or lacquer away so that you’ve stripped it back to its original wood. This will ensure that the guide adheres. Ensure any locations you previously filled with wood filler follow the wood. Wipe carefully with a moist cloth to get rid of any remaining residue.
You are going for a smooth coat of primer all over, so the very best tool to use is a paint roller for all the wide spaces. Heavy stack rollers are for anything with a deep grain, medium-to-short for smooth surface areas. Use a little paint brush for the comprehensive locations. Sand in between layers (see below) and use numerous coats of guide, guaranteeing you let it dry effectively in between each layer.
In between each layer of primer discuss the whole piece with a sandpaper. This will make sure the paint bonds with the guide. Around 120 grit sandpaper would be perfect which will offer eliminate any small flaw and rough the guide up enough for the paint to stick well.
Guarantee you use a good quality paint brush or roller for the paint layer. The distinction in the bristles or stack quality makes a big distinction to the end outcome and will save you needing to choose any loose bristles or swellings of clagged up paint. We advise the Hamilton paint brush variety and the Hamilton roller range. Coat the furniture in a thin layer, using the roller for big surfaces and a brush for small. Do not use too much paint at once, instead use several coats of thin layers for a better finish. Once totally dry you can add a clear varnish to the whole piece to secure it from nicks and scratches, however the quality of your paint may assist you decide whether you require this.
Care for your brushes
When you invest in good paint brushes you’ll want to keep them in shape and you’ll find that with the ideal treatment they’ll be reminded an exceptional condition once again, all set for future paint jobs. Usage either tidy spirit or white spirit to clean up the brushes and once clear of paint, cover in clingfilm to keep them supple. You can also use paint brush restorer if the bristles have actually dried up or have old paint on them.
Post Sponsored by Sutton Glass 24/7 – Your Local Glazier.